Sentence examples for the tolerance between from inspiring English sources

After repetitive use, the tolerance between the parts will become larger, consequently increasing the initial deflection, which has been proved to considerably decrease the load capacities of the power cylinders.

The tolerance between the results of the simulation and the approximation model was less than 1% when using the optimal design variables and the weight of the optimized frame was lessened by 22.3% while the minimum fatigue life and maximum static stress were only decreased by 3.8% and 4.6%, compared with the initial frame.

With values of r = -0.472 for the correlation and t = 0.763 for the tolerance between both variables there is no statistical hint for multicollinearity in our model.

For the determination of a suitable deuterated solvent, the tolerance between analyte and standard within one sample was measured by running H NMR experiments at t = 0 h (immediately after sample preparation) and t = 24 h.

For these mock-ups, the tolerances between the surface and the tubes could be kept within ±2 mm.

This allowed us to compare the climatic tolerance between the native and invasive distributions of the Slider turtle for all 19 'bioclimate' variables.

Thus, the differences in gene expression, AS events, and miRNAs under cold stress may contribute to the differences in the cold tolerance between S. lycopersicum and S. habrochaites.

Positional tolerance is a special type of geometric dimensioning and tolerancing which describes the tolerance region between the actual location of machining results and the target location.

The spacing schematic is presented in Fig. 20, and the tolerance (t) between the two well is varied to observe the change in well spacing.

In addition, the tolerance levels between former opponents were set to baseline again only when the bystander was a good friend of the opponent.

The tolerance varies between 0 and 1, and a value of 1 means totally uncorrelated included variables.