Sentence examples for the thickness and width of from inspiring English sources
When a segment of sheet is strained (i.e., elongated) in one direction, the thickness and width of the segment must shrink, since the volume remains constant.
The variables are the thickness and width of the side plates as well as the dimensions and numbers of stiffeners in both directions.
Geometric parameters such as the thickness and width of a beam are random for various reasons including manufacturing tolerance and operation wear.
The thickness and width of the side plates as well as the dimensions and numbers of longitudinal stiffeners are calculated to fulfil the constraints and minimize the cost function.
The lengths of the nanobelts range from several hundreds of nanometers to several tens of micrometers, and the thickness and width of nanobelts are ∼15 and ∼60 nm, respectively.
These parameters include the thickness and width of the guide core, mode effective refractive indices and group refractive index, diffraction order, pitch of adjacent waveguides, length difference of adjacent arrayed waveguides, focal length of slab waveguides, free spectral range (FSR), the number of input/output (I/O) channels, and that of arrayed waveguides.
This paper refers to the case where the non-liquefiable crust is not natural, but it has been artificially created by ground improvement, and focuses upon the effect of the size (thickness and width) of the improved area on the seismic settlement and the degraded post-seismic bearing capacity of the foundation.
Based on this equation, after mathematical manipulation, the calculations of the volume, thickness and width of the annular MR fluid within the cylindrical MR fluids brake are yielded.
The optimal thickness and width of the TiO2 electrode film were 12 μm and 5 mm, and the optimal thickness of Pt counter electrode film was 4 nm, respectively.
The length, thickness, and width of a beam of the fabricated tuning-fork were 1500 μm, 100 μm, and 100 μm, respectively.
The average thickness and width of tape were ca. 20 μm and 7.2 mm, respectively.
