Sentence examples for the strength of samples from inspiring English sources

The strength of samples has bed tested and calculated using the Mohr Coulomb rock failure criterion as follows: tau_{text{f}} = tau_{text{o}} + sigma cdot tan (phi ) (2).

As the data presented in Fig. 9(b), the flexural strength increases with the addition of VMA and the strength of samples with 1.5% VMA is approximately 26% higher than that without VMA.

For the different samples soaked in the same solution for a given duration, the strength of samples containing fly ash is larger than that of samples in absence of fly ash, and the strength of sample containing quartz sand is larger than that of samples in absence of quartz sand.

To compare the strength of samples in wet condition with that of dry ones, wet specimens were prepared by soaking the samples in phosphate buffered saline (PBS) for 8 h at 37°C.

The strength of sample type 1 is on the higher side which can be attributed to the excellent bond strength due to liquid phase sintering.

These studies revealed that added water reduces the strengths of samples via the enhancement of dislocation creep, diffusion creep, reaction creep, and/or solution precipitation creep, which are also associated with the development of microstructures.

But in the samples containing lime, the strength of the samples is increased with curing time proportionally.

With increasing the curing time, an improvement in the strength of composite samples is observed.

The mixed model underestimated the strength of nanostructured samples, whereas the simple grain boundary model worked better.

Ettringite was also found in stabilized soils and acts in the opposite direction to reduce the strength of soil samples.

As the results show, the strength of untreated sample is higher than that of the coated samples.