Sentence examples for the spraying time from inspiring English sources

In the fourth sample, the spraying time and distance are changed while other parameters are constant.

It indicates that the thickness of Ni Al coatings increases with increasing the spraying time.

The collected mass of CaCl2 by the film increases as the spraying time increases.

Finally, the best average value of Eff of 3.14% is obtained while the spraying time is 1,000 s. Figure 6 shows the effect of the nanotube length of the TNT photoanode on the photovoltaic performance of F-DSCs.

The CB particle size is varied from 20 nm to 90 nm and the CB electrode thickness is controlled from 1 μm to 9 μm by controlling the spraying time.

Disordered-to-ordered and porous-to-compact GO membrane structures can be finely and conveniently manipulated via controlling the spraying times and evaporation rate during GO assembly.

The spray time for each sample was 10 min.

It is shown that by increasing the spray time, the production of nanoparticles begins.

The electron transfer resistance (Rct) at the interface of CNTs/electrolyte reduced with the spray time increased, and the Rct of BCNT is the lowest among the CNT CEs.

It can be noted that the spray distance can be increased by increasing the spray time, to reach the desired result of the coating at the better spray distance.

By controlling the motion of the nozzle and the spray time, a desired 3D microstructure of the deposited material can be formed through a layer-by-layer scanning technique.