Sentence examples for the specimens indicated from inspiring English sources

Inspection of the nailed plate anchors after failure of the specimens indicated very little lateral (shear) deformation of the nails; thus the increase in FRP bond strength provided by the anchorage system was attributed to frictional resistance from the normal pressure exerted on the FRP by the anchors.

The fractured surfaces of the specimens indicate a different failure mechanism for galvanized and uncoated high-strength steel.

Microstructural analysis of the specimens indicates that two failure conditions can potentially arise, dependent on the thermomechanical condition of the material.

Only pollen organ-bearing leaves have been observed on the specimens indicating that glossopterids may have been dioecious since ovulate material is not observed in any layer.

Although the fracture loads varied with specimen thickness, the critical stress intensity factor was constant for all the specimens indicating that the measured fracture toughness can be used to predict delamination initiation from transverse cracks.

The fractographic analysis of the specimens indicates that the final fatigue fracture could be due either to the joint action of a large number of cracks, which propagate from the substrate coating interface, or to a single dominant fatigue crack, depending on the maximum alternating stress applied to the coated system.

The collection dates of the specimens indicate that patient 1 and patient 8 attended the outpatient clinic on the same day on 2 occasions.

Regardless of treatment duration, significant annular disruption at the structural level was not noted in any of the specimens, indicating a state reminiscent of the early stage of disease in humans.

However, the calculated median of the maximum dorsal displacement of 32o is just shy of the maximum of 34o recorded in one of the specimens, indicating that these factors are of less importance and that this may therefore represent a fair estimation of an upper threshold angle, which may of course vary between individuals.

Compressive and bonding strength of the specimen indicate the significance of curing temperature in the activation of MIRHA particles.

At key points A, B, C, and D, the sensing coil senses changes of the specimen, indicating the moment that the magnetic field of each coil is first disturbed by the crack.