Sentence examples for the sample was set from inspiring English sources
The light spectra (solar simulator with a UVF or solar simulator with a red-pass filter) were measured at the same place at which the sample was set during the disinfection experiment.
The thickness of the sample was set by a polytetrafluoroethylene stripe (10 or 30 μm).
The contact of the sample was set with the environment after evacuation.
Temperature of the sample was set at 200 (± 2) K with an Oxford Instruments Cryojet system 700 series.
After the sample was set in the machine and heated to 95 °C, the steam was injected into the sample holder at a flow rate of 0.2 L/min.
As described previously, the tip can be simplified as a combination of a cone and a spherical cap, and the distance between the tip apex and the sample was set at 350 nm.
The size of the sample is set to be 1000.
The initial pore pressure of the sample is set equal to (P_{i}).
Powers at the sample were set between 0.5 and 5 mW using neutral density filters.
In the simulation, the coupling time between the incident particles and the sample is set to be 0.5 ps with a time step of 0.0005 ps.
In the second stage SVM model, the sample is set as (x i, y i ), i = 1, 2, ⋯, l, x i ∈ R n.
