Sentence examples for the sample plug from inspiring English sources

The sample plug properties of permeability, porosity, connate water saturation and residual oil saturation are shown in Table 1.

Therefore, this configuration is well suited for capillary electrophoresis applications which require a highly sensitive resolution of the sample plug.

Valve switching to bypass should be produced immediately after the arrival of the end of the sample plug to the valve (tV).

In many cases, the preconcentration plug, particularly used for the delivery of preconcentrated samples to external equipment and devices, needs to deliver the samples with minimal dispersion; however, the dispersion of the sample plug is a critical issue [19].

Fine system synchronization is further achieved by starting the gradient at the match time (tM), which is the time required to match the arrival of both the gradient front and the end of the sample plug to the valve, and therefore also to the column inlet.

This causes diffusion of molecules at the front and rear ends of the sample plug.

Layering for this model was done by creating surfaces between each of the sampled plugs (Fig. 18).

In contrast, for pinched injections, the size of the injected sample plug is fixed by the intersection volume.

For Tris glycine, the injected plug is stacked at a ratio of 3.6, based on comparison of full width at half-maximum (fwhm) for the loaded sample plug width to the minimum stacked fwhm (CV = 2.6%, n = 3).

A subsequently executed central composite design determined the largest sample plug that can be injected without compromising the separation.

The serum sample plug was flanked by two air plugs to prevent the diffusion of serum components into the buffer.