Sentence examples for the related errors from inspiring English sources
We discuss the related errors in viscosity measurement based on deviations in the determination of the Q-factor and resonance frequency.
Although the coincident measurement of a pair of annihilation photons by a ring of detectors surrounding the patient is disturbed by random and scattered (Fig. 2) coincidences as well as by events lost due to tissue attenuation, the related errors can be corrected sufficiently so that the final quantitation error is in the range of a few per cent.
Figure 3(a) presents the obtained group-delay responses while the absolute errors of group-delay and phase are shown in Figures 3(b) and 3(c), respectively, accompanying those of the Deng's method in Section 2. The related errors in (29) are tabulated in Table 1.
The related error of the function value of two methods is much less than 1 % for different parameters β.
The related error probability is denoted by Pe bit and it is computed in the next section.
The constitutive model is piecewise-linear, where characteristic force displacement points are clearly defined and the related error terms are estimated.
In Figures 14 and 15 the RB evaluation (for N = N max ) of these two outputs of interest are reported, as well as the related error bounds.
As a consequence, the related error magnitude should then be verified, in order to ensure that it is at an acceptable level.
In Table 1, we show the numerical comparison of our method and the MM method on three parts, the related error of function value ((text {ReE}_{f_{A}})), related error of minimizer X (ReE X ), and the mean absolute error of X (MAE X ).
In Figure 8 the RB evaluation (for N = N max ) of the output of interest is reported as a function of the parameters, as well as the related error bound.
In the following Figure 21 the behavior of the (RB evaluation of) output (67) is shown, as well as the related error bounds (magnified by a factor 10), in the case of heat emission (Figure 19); we have considered a concentrated (in time) output (corresponding to h ( t ) = δ ( t ) ), given by the (spatial) average of the concentration on the cylinder at each timestep.
