Sentence examples for the reduction coefficient from inspiring English sources
To this end the reduction coefficient should be applied to the width of the diagonal strut.
The group effectiveness and the reduction coefficient for the wave current forces on the group were examined for engineering design.
The formulae of the reduction coefficient of mechanical properties of stainless steel at elevated temperatures were put forward.
The reduction coefficient that considers the effect of the openings in the concrete flange on the ultimate bending resistance was also obtained.
The best correspondence between both parameters was achieved when Alejano's drop modulus equations (estimated based on calculating the reduction coefficient of deformation modulus, ω) were used to estimate the drop modulus.
varepsilon^{prime} = alpha cdot varepsilon_{0} (11 where ε′ is the total porosity after carbonation, α is the reduction coefficient of porosity, and ε0 is the total porosity before carbonation.
The present Eurocode contains the reduction coefficients (0.8 and 0.9 depending on the steel grade) for high strength steel joints.
The polynomial could represent the quantitative relationship between the backfill strength and FT. When the solid density (SD) within the CTB was constant, the value of the strength reduction coefficient k gradually decreased with the increase in FTs.
The drag reduction coefficient increases with the increase of the length-to-diameter ratio of aerospike and the jet pressure ratio, and the maximum drag reduction coefficient deceases with the increase of the jet pressure ratio.
The article includes a study of the strength reduction coefficient to account for the shear lag effect.
The area reduction coefficient (ARC) and the ambit occupation coefficient (AOC) were defined and calculated for each shoulder.
