Good agreement between the test results and the prototype is achieved.
The operational capacity of the virtual prototype is achieved through communication and collaboration between the multiple agents that make up the system.
Important steps towards identification of novel antiplasmodium (NT1Cu, IC50 of 4.6 μM) and antiamoebic (NT2Pd, IC50 of 0.6 μM) drug prototypes were achieved.
In addition, the prototype piece was achieved with a maximum deviation of 0.9% compared to the nominal value indicated in the plot.
Although the initial design of the DEAHP prototype was based on fitting it to the MED unit power demand and their direct connection, the prototype was unable to achieve steady operation in this configuration.
A hand-held prototype instrument was achieved by integrating an imaging fiber probe inside a stainless steel needle and attached to the ceramic shaft of a piezoelectric motor housed in an aluminum handle.
This was considered as achieved when the prototype was successfully tested to 3000 cycles at a temperature of 300 °C.
The prototype was unveiled last year.
The prototype was first flown in March 1989.
First, the prototype was introduced briefly.
