Sentence examples for the oxide process from inspiring English sources

The case study determined that the best way (A3B3C1) involved the operating strategy with the lowest conveyor speed in the scrubbing and DES process and the fastest conveyor speed in the oxide process, which can reduce approximately 28.38% and 28.81% of the emissions concentration of hydrogen chloride and dust, respectively, in comparison with the current operating strategy (baseline).

We observed no significant degradation except the driver circuit in the VCSEL driver fabricated using the thick oxide process in order to provide sufficient voltage to drive a VCSEL.

b Growth of silicon oxide with respect to time in the oxidation process; silicon oxide grows until the saturation point, and then remains at a constant saturated thickness (Tox, sat) after this saturation time.

Here, the volume of metal expresses the consumed metal volume during the formation of oxide shell in the oxidation process.

The Moving-Bed Copper Oxide Process is capable of simultaneously removing sulfur oxides and nitric oxides within the reactor system.

Three regions in the oxide growth process have been distinguished from the recording of anodic potential vs time for constant current.

The reaction mechanism accounting for this small slope was proposed, in which the oxide formation process is assumed as a combination of a fast electron transfer step and a following slow step.

For the purpose of comparison, the same ZrO2 with the same particle size was pre-heated at 750 °C (marked as −750), the same temperature as the oxide carburization process.

LyondellBasell derives isobutene from the dehydration of tert-butanol which is coproduced in its propene oxide process.

The final goals to be achieved were (1) to evaluate the uncertainty level of the ASNC in nuclear material accountancy of the process materials of the oxide-reduction process for spent fuels and (2) to evaluate the applicability of the neutron coincidence counting technique within a strong radiation field (e.g., in a hot-cell environment).

Five different abrasive systems were tested in the oxide CMP processes, and their performances were evaluated in terms of material removal rate (MRR) and surface roughness.