Sentence examples for the optimized condition was from inspiring English sources

However, in another study, the isolated microbial species were optimized through the numerical optimization technique and the optimized condition was temperature 33.60 °C, pH 9.88 and whey-waste concentration of 14.27 g L−1, which can biodegrade an initial cyanide concentration of 500 206.53 mg L−1 in 96 h (Mekuto et al. 2015).

The optimized condition was also examined to substantiate the empirical models generated using RSM.

The optimized condition was validated with the actual citric acid concentration of 83.00 g L−1.

The optimized condition was ultrasound intensity of 120 W.cm−2 and pulse factor of 0.4, yielding 3.24 wt%.

The optimized condition was at temperature of 80 °C, flow rate of 6 ml/min and deposition time of 4 min.

The optimized condition was found to be 1.66 mol equivalent of 1-butanol (with respect to total fatty acid chains), 10 wt.% of DBSA catalyst (with respect to AFWS) at 105 °C for 3 h.

The experimental macrograph for the optimized condition is concurrent with the numerical simulation.

The optimized condition is found to yield about 20.47% improvement in hardness of the coating comparedto the initial condition.

An accepted way for obtaining the optimized condition is based on the design of experiments and statistical analysis.

The optimized condition is the scenario after the modifications that will be describe at the item Results.

Maximum biosorption capacity obtained in continuous mode under the optimized conditions was 69.08 mg/g.