Sentence examples for the mounting process from inspiring English sources

Fifty years ago when high voltage lines were first put up the wires were under stress during the mounting process and would often acquire a slight permanent strain.

For manufacturers, Mr. Wischhusen said, the sensor is another part number in inventory, another piece to be damaged in the mounting process.

Freezing of crystals directly into the cold stream is permitted, provided coverage of surfaces and equipment is adequate to catch any viral material which could be dropped in the mounting process.

Cells showed active streaming after mounting, suggesting minimal stress induced by the mounting process.

Because cells are not uniform in size or shape, and fixed cells tend to be wider due to the mounting process, distance was normalized.

However, we still recommend taking digital images before mounting when possible, because there is always the possibility that leaf material can suffer mechanical damage or lose stain during the mounting process.

However, because of the physical size restriction imposed by the surface mounting process, most SMCs are designed for power dissipation no higher than 1 to 2 W. SMCs can be assembled onto PCBs with the use of solder paste reflow, wave soldering, or conductive adhesive curing processes.

When your print is securely attached to the backing on all sides, then the dry mounting process is complete.

Yamada et al. [9] proposed a power-assisted precise positioning support system for the window mounting process.

These thermal effects may be reduced in the future by either p-doping the active region [31] or using the epi-down mounting process [32].

The mentum and other mouthparts of chironomid larvae damaged during the cleaning and mounting process usually have abrupt breaks that are clearly visible and easily distinguishable from deformed structures.