Sentence examples for the mode effective from inspiring English sources

The mode effective index variation versus applied bias can then be obtained.

Influences of parameters, such as doping and thickness of the delta-doped layers and number of wells, on the mode effective index and on the depletion bias are investigated with a design of experiment method.

The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss.

The influences of the mode effective index difference, extinction ratio (ER), and sensitivity on the homogeneous sensing of sucrose solutions are investigated by using 3-D finite-difference time-domain (FDTD) method.

The dependence of the mode effective index and coupling length on the separation from 0.1 to 2 μm is presented in Figure 7c.

In Figure 3a, the mode effective indices of the AHPMW waveguide for different gap heights increase as the width of the metal becomes wider.

The exact RWG resonance for a plane wave impinging and an order p (often p = ±1) is given by Eq. (1): where θinc is the angle of incidence, k0 = 2 π/ λ is the vacuum wavevector of incident light at vacuum wavelength λ, G0 = 2 π/Λ is the grating wavevector, and neff is the guided mode effective index in the adequate polarization of wavevector kguid.

However, a further simplification can be made taking into account that cantilever (building) systems analyzed by the approximate method of the continuous medium have shown that the first mode effective height varies from 0.726H for purely flexural systems, to 0.636H for purely shear-type systems (Chopra 2008; Clough and Penzien 1993).

The dependence of structural parameters on the effective index of the fundamental guided mode, effective index of the fundamental cladding mode, mode field diameter, confinement loss, effective mode area, and chromatic dispersion in PCF have been studied, respectively.

For such values of αΗ the variation of the corresponding first mode effective mass, M e *, is very narrow [between 0.623 and 0.645 of the total mass (Georgoussis 2014)] and therefore it can be taken approximately equal to 0.635M tot.

Using the finite elements method (FEM), the guiding properties including mode effective index, propagation length, normalized modal area, and figure of merit (FoM) are intensively investigated at a wavelength of 1,550 nm to target potential applications in telecommunications.