Sentence examples for the maximum chamber from inspiring English sources

The maximum chamber pressure achieved was restricted to 55 bar absolute, due to a conservative approach in the test programme dictated by the uncertainty in heat transfer to the pintle.

LV end-diastolic diameter (LVEDD) was measured from the M-mode tracings of the maximum chamber cavity.

For each tamponade agent, the maximum height of the tamponade bubble (presented as a percentage of the maximum chamber height) and the arc of retinal contact subtended by the tamponade bubble (in degrees) were plotted against percentage fill (Figs.  4, 5, 6).

Given the purity level of the carbon dioxide in the gas cylinder (99.9999%) and the rate of outdoor air supply to the chamber, the maximum possible chamber air concentration of impurities originating from the cylinder of CO2 was only 2 ppb.

For the tip region, a thinner hydrofoil of maximum thickness 16% and maximum chamber 10% was designed.

The maximum pressure inside the chamber was used to evaluate the initiation characteristic of PBX materials.

Two vent openings with an adjustable free cross-section were used to control the maximum overpressure inside the chamber.

As hydration of the concrete proceeded, the temperature within the specimen exceeded the maximum temperature inside the chamber (60 °C), reaching the maximum temperature of 76.2 °C at the elapsed time of 7.7 h of steam curing.

The maximum temperature in the chamber box of the BLP-TES device was 42 °C at 5 min, 70 °C at 15 min, and 75 °C at 30 min (Sakudo et al. 2013b).

The reported KL, for the knee in general, was calculated as the maximum score in either chamber.

The chambers were designed at 200 mm height intervals, and the maximum height of the chambers was 1000 mm.