The materials used in this lesson plan were commercials, slogans and logos from daily life.
The materials used in this study were 25 AK and 50 SK sheet steels.
The materials used in this study are austenitic stainless steel, SUS303, and aluminum alloy, A5056, 9 ± 0.0005 mm in diameter.
The materials used in this investigation are a 42CrMoS4 (M-A) and a X5CrNiCuNb16-4 (M-B) steel.
In the journey towards minimising these damaging effects, the first key step is understanding the environmental performances of the materials used in this sector.
Results also indicate that a PF content of 0.9 kg/m3 has the optimum concrete performance output for the materials used in this study.
For the materials used in this research, a thermal conductivity of 2.88 W/m °C and diffusivity of 1.42 × 10−6 m2/s were attained from the back-calculation.
The materials used in this investigation comprised LY12 aluminum-alloy as a substrate, SY-24C as the adhesive system and T300/3234, G803/3242 and SW220/2322 fibre/epoxy prepregs as the patch materials.
The materials used in this work are multilayered films comprising tens to thousands of alternating layers of two polymers, Bisphenol A Polycarbonate (PC) and polymethyl-methacrylate (PMMA) fabricated by layer multiplying coextrusion technique.
All the materials used in this technology are very cheap, so the engineering cost is lower than, and the efficiency higher than, those of the usual consolidation methods the heavy tamping method, the sand or granulate stone compaction stake method, and dry jet mixing method.
Table 1 Properties of the materials used in this study.
