Sentence examples for the material solution from inspiring English sources

The LDM developed by Xiong et al. (2002) involves the fabrication of 3D scaffolds in a low-temperature environment under 0 °C to solidify the material solution when deposited on the platform.

The plastic cover was the material solution that did not extensively affect DBT images.

Thus, both 254 SMO and 654 SMO have an important place in the material solutions for the oil and gas industry as they tackle the problem of sour corrosion caused by a H2S corroding agent.

In order to investigate the effect of microstructure in the solid material, solution treatment and aging are performed to all the specimens and then examined for the same strain rates.

A high voltage is applied to the ceramic material solution with a polymer, and an electric field is generated between the tip of the syringe containing the solution and the collector.

Duplex AlN/W1−xRex coatings were fabricated in two steps by chemical vapor deposition on bulk silicon carbide to verify experimentally the theoretical material solution approach.

In this paper, the purification process in continuous mode by reacting sulfuric acid and HI in a packed column was experimentally studied; the influences of operational parameters, including the reaction temperature, the flow rate of nitrogen gas, and the flow rate of the raw material solutions, on the purification efficiency, were investigated in detail.

The construction industry needs to reduce its negative impact on the environment and the renewable nature of timber presents a material solution to the problem.

The architectural, constructional, and material solution of a brick-built passive family house is presented, together with a computational analysis of the overall thermal performance.

The material balance solution incorporates water influx from associated aquifer, water influx from shale, formation expansion, connate water expansion and formation of condensate.

Consequently precipitate-free zones, referred to as "β flecks", remain within the beta matrix when the material is solution treated above the transition temperature and subsequently aged at temperatures between 454 °C and 538 °C.