Sentence examples for the main inlet from inspiring English sources

The main inlet is marked with a red arrow.

The main inlet parameters tested steam pressure, water pressure and water temperature were in the range of 0.20 0.60 MPa, 0.14 0.49 MPa and 18 68 °C, respectively.

Within-storm variability, nutrient concentrations were assessed at 2 to 3-h intervals at both the main inlet and outlet of each CW.

A schematic representation of the setup is shown in Fig. 2. Magnetic nanoparticles were homogeneously injected at the main inlet and their trajectories were calculated by solving Eq. (18).

First, a design of experiments (DoE) has been conducted for three variables viz. the flow rate through the secondary inlet, the (square) cross-sectional area of the secondary inlet and the location of the top of the main inlet from cyclone roof.

When you get lost in Suomenlinna (and inevitably you will), head back toward the main inlet.

Among the various shapes studied for the main condenser inlet, tapered inlet results in the lowest thermal resistances for both the main and secondary condensers.

The studied geometry included only one main inlet artery (D inlet≈4 mm) and seven outlets (D outlet≈ 0.4 – 1.5 mm).

Vortex chamber was maintained at the main air inlet port for controlling secondary air flow rate and wall temperature.

Influence of the heat sink temperature stability has been quantified: 1.5%pt reduction for 5 °C increase with a minimal cycle pressure of 7 MPa; however, performance stability could be improved by adapting the main compressor inlet pressure.

The main compressor inlet temperature was chosen to be 35 °C to accommodate various heat-sink temperatures while the maximum pressure was parameterised at 20 MPa and at 25 MPa.