Now if (n > 1) and (K) is a proper submodule of (M), then, by assumption, c.u.dim((K) le ) length((K) < ) length((M)).
The result is that the electrostatic persistence length, le, is proportional to κ−1, in the region of high to moderate ionic strength, as is usually observed experimentally for flexible polyelectrolytes, while at the lowest ionic strengths, le tends to level off, which was predicted theoretically.
The LE analyses show that minimum reinforcement length of the upper tier (L1,min = 0.7H1), according to the compound design in FHWA design guidelines, is insufficient, such that failure surfaces do not pass through all reinforcement layers in the upper tier.
Results converge on the more accurate, but sometimes more computationally intensive, continuity of pressure (COP) coupling approach as the coupling length (le) parameter within the FOEC is decreased (i.e. FOEC increased).
Moreover, the maximum length (le), the length from the petiole to the apex (lc) and the maximum diameter (d) of each leaf as well as the length of leaf petioles (lp) were also measured with the ImageJ 1.43u software package on images collected with an Epson Perfection 1640 scanner (Seiko Epson Corporation, Nagano, Japan) at a resolution of 1600 dpi.
The effective bond length (Le) of hybrid SFRP composites was approximately 39 mm.
The axial length was 23.1 mm in the RE and 23.15 mm in the LE (Fig. 1).
Meanwhile, among his operettas that season were the full-length Le pont des soupirs and the one-act M. Choufleuri restera chez lui le..
The LE were computed over 6.1×106 hours.
