Sentence examples for the impactor for from inspiring English sources

The impactor for the acetabular shell can be angled to reduce the impingement of the soft tissues in positioning the definitive acetabular cup avoiding a vertical shell position.

The impactor for the shell can be provided with lateral alignment frame that gives an exact 45° abduction and 20° forward flexion of the shell (Fig. 6).

Overlapping of the Raman spectra of the double-component powders from the Seretide® 250 pMDI collected using two different methods demonstrated the applicability of the impactor for a representative sampling of multi-component aerosol particles for bulk composition analysis.

The impactor mass for the onset of the atmosphere and vapor cloud loss is assumed to be midep, under which the equality in the inequality (16) holds with the impactor-vapor mass relation (19) and the velocity-energy relation (20).

Zn, Pb and Cu on fine particles account for approximately 80% and those on the coarse particles are less than 20% of the total heavy metals collected on eight stages of the cascade impactor for both incinerators.

Threshold velocities for different combinations of pitch and yaw angles of the impactor were obtained for the impactor-target test configuration in the numerical simulations.

When the test temperature decreases both unfilled laminates and those filled with Nanostrength exhibit a large impact resistance characterised by the return of impactor for all the impact energies.

The impact model proposed only requires five parameters: two parameters for the impactor (its mass and initial impact velocity) and three parameters for the Hunt Crossley contact force law describing the specimen.

The average particle losses for the impactor nozzle as well as the sampler body were below 10% and the overall pressure drop (including a backup 47 mm filter) through the PM2.5 sampler was only 2 in. of H2O.

The exact duration of impact heating depends on variables such as the size, composition and velocity of the both the impactor and target material, although for meteorites the timescale is predicted to be short (Beck et al. 2005).

The design parameters of the impactor were selected considering the Stk50 for an impactor with a rectangular nozzle.