Sentence examples for the highest luminance of from inspiring English sources

Consequently, among these polymers, the device made of P3 as an emitter has the highest luminance of 2590 cd/m2 at 9.5 V.

With the device configuration of ITO/PEDOT PSS/polymers:PBD/CsF/Ca/Al, PCC-2 showed the best performance with the lowest turn-on voltage of 3.1 V, the highest luminance of 6369 cd/m2, the highest current efficiency of 1.97 cd/A, and the best power efficiency of 1.40 lm/w.

While the ratio increased to 3 7, the PFCz3OXD7Ir showed the best device performance in the polymer light-emitting device with a configuration of ITO/PEDOT/polymers/LiF/Al. A turn-on voltage of 6.0 V, a maximum current efficiency of 0.59 cd/A and the highest luminance of 917 cd/m2 were presented.

They have shown the outperformance of the edge integration model over the highest luminance rules of Anchoring theory [26].

In a yellow emitting TFEL device fabricated using a Y2GeO5 phosphor thin film prepared with a GeO2 content of approximately 50 mol.%, a high luminance of 758 cd/m2 and a luminous efficiency of 1.4 lm/W were obtained when driven by a sinusoidal wave voltage at 1 kHz.

Moreover, at high luminance of 1000 cd m−2, the device still remained high current efficiency of 8.7 cd A−1 and EQE of 7.3%.

The electroluminescent devices based on doped Re-FPPhen complex showed very high luminance of 9293 cd m−2 and reasonable luminance efficiency of 9.4 cd A−1.

The device exhibits maximum total efficiencies of 29.8 cd/A and 20.9 lm/W, which slightly decrease to 28.6 cd/A and 16.5 lm/W even at a high luminance of 5000 cd/m2.

The high luminous efficacy of plasma display demands high luminance at reduced discharge power.

Compared with the current industry requirement, the IBLM has an 85% higher luminance uniformity of the emerging light, which demonstrate the feasibility and universality of the proposed algorithm.

This is the case of the detected high luminance, which can cause disturbances or discomfort for certain situations of use.