Your English writing platform
Discover LudwigExact(6)
UHPFRCs showed the highest gauge factor (433) until the first cracking point, whereas the SH-SFRCs with a 152 MPa compressive mortar matrix showed the highest gauge factor (73.7) within the strain-hardening region.
The highest gauge factor at higher temperatures (GF = 7.2 at 250 °C) was observed for moderate doping level (boron to carbon ratio of 3000 ppm).
The unintended noise in the FCR of the plain UHPC was largely mitigated by adding the steel fibers, while the highest gauge factor (GF) under tensile load was found for the plain UHPC with CNTs.
Dependence of the piezoresistive gauge factor of DLC:Ag films on the substrate bias was resonance type with the highest gauge factor values observed in 50 100 V negative voltages range.
All the SH-SFRCs investigated had nominal gauge factors ranging between 50 and 140; these values are much higher than the commercially conventional gauge factor, which involves metal and is around 2. Both T30/0.3 and T20/0.2 produced the highest gauge factor, i.e., the best damage-sensing capacity, whereas S13/0.2 produced the highest electrical conductivity.
The highest gauge you should be worried about using for this project is 16 gauge.
Similar(54)
Contrary to what may be conventional wisdom, the higher gauge number indicates a thinner wire, and the smaller gauge number indicates a thicker wire and heavy-duty cord.
Compared to other combinations of piezoresistor material and SU-8 structural layer, this ultra-sensitivity of graphene-based SU-8 polymeric cantilever is primarily due to the high gauge factor of the graphene nano-platelet piezoresistor (G = 144) [195].
The higher gauge factor of CB-doped SU-8 and lower Young's modulus of SU-8 structural layer result in G/E close to 4. In recent times, CB-doped SU-8 polymeric cantilever has been demonstrated to have better electrical sensitivity than optics-based designs [233].
Gauge is the number of needles per 1.5 inches (3.8 cm) in full-fashioned stockings; the higher the gauge number, the closer the stitches.
In addition, most of the phenomenological approaches discussed in the literature invoke higher gauge symmetries beyond those observed at very low energy limit where all well-known symmetries are not broken at all energy levels.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com