Sentence examples for the half peak from inspiring English sources

At the "half peak position" point, denote the net displacement by ∆x02.

In addition, the peaks of titanium-doped ZnO powders synthesized from zinc nitrate and zinc chloride are sharper than others, and the half peak width is narrower.

On the other hand, when the height of the entering ion beam is 0.4 mm, the maximum intensity is 44, the corresponding peak position is 6.95, the half peak positions are -7.09722 and -6.70556, and the resolution is 6.95/ 7.09722-6.70556)=17.7.

Selected 1200 topside electron density profiles from the Interkosmos-19 observations at high solar activity (1979 1982) are used for calculation of topside part of vertical electron content VEC between the F2 layer peak height, hmF2, and the height ht05 of the half peak density 0.5×NmF2.

The half peak shape is used instead of a full peak shape because it allows the better detection of partially resolved species.

For irreversible processes, the E1/2 was estimated from the half peak potential Ep/2 via E1/2 = Ep/2 – 1.09 RT/ nF.

These mechanisms were confirmed by the half-peak potentials and the displacement of the peaks associated with HCl activity.

where λ is the wavelength of incident X-ray, θ is the incident angle of X-ray for a specific mirror, and B is the half-peak width.

From the half-peak widths and peak areas of the surface redox waves of the film electrode, the first three surface waves are corresponding to two-electron processes.

The result is shown in Figure 2, where we can spot an FMR (or FMR-K) event at H = H R = 0.68 kG, and define the half-peak width ΔH = 53 Oe. Figure 2 Ferromagnetic resonance of the Co 40 Fe 40 B 20 film with the microwave frequency f = 9.6 GHz.

In a similar manner relevant procedure allowing to fit IRI topside electron density profile to additional anchor point – the half-peak density height h05top at electron density equal to 0.5 × NmF2 above the F2 peak is included in the IRI ionosphere plasmasphere model.