Sentence examples for the gain temperature from inspiring English sources

The gain (temperature difference between source and sink heat exchangers) and frequency at which marginal stability (desirable continuous oscillations) can be achieved is calculated.

To improve the gain-temperature characteristics of ATCXOs, a quartic compensation algorithm and network are derived using curve fitting technique.

According to the frequency-temperature characteristics of AT-cut quartz crystals, the gain-temperature characteristics of voltage control crystal oscillators (VCXOs) are firstly derived and approximated by cubic functions.

However, for some signal wavelengths, the erbium-doped fiber (EDF) lengths at which the gain is temperature independent are observed.

Two gain temperature coefficients were also obtained at low and high temperatures, α1 and α2, with a temperature of 280 K being the boundary between the two regions.

This investigation was focussed on the gain at room temperature.

The gain dependence on temperature (~ − 1.5%/K) is consistent with ground laboratory experiments (Kasahara et al. 2012).

The usefulness of the newly defined axis, ie the weight gain vs temperature, on the investigation of manganese dioxide was demonstrated and discussed by showing the consistent, comparable thermal gravimetric data of electrolytic MnO2, chemically prepared and thermally transformed beta-MnO2s and the heat-treated electrolytic MnO2s.

The USB plug itself also gains temperature and humidity sensors to collect additional data points into sleep research.

The losing in high temperature rutting resistance is surpassed by the gaining in low temperature cracking resistance due to the temperature susceptibility improving effect of the bioasphalt.

This is because the APD gain is temperature dependent (Kasahara et al. 2012), and thus, the PH0 varies with temperature, but the FPGA does not have a sufficient memory capacity to hold multiple PH0 tables for various temperature values.