Sentence examples for the fluid design from inspiring English sources
Hydraulic and thermo-hydraulic analyses show that the coolant manifold system could meet the fluid design requirement preliminarily and the temperature of RAFMs structural parts, Be and Li4SiO4 pebble beds are within the allowable range, and no zone shows a stress higher than the allowable limit in the preliminary structural analysis.
Olson acknowledged that FDOT has relied more heavily on the fluid design-build approach in recent years, which he said can save money.
Results presented in this paper can be used to study the transient pore pressure and stresses in the near-wellbore region, and to optimize the drilling fluid design (e.g., optimized salt type, salt concentration, optimized membrane efficiency, fluid pressure etc.).
Two magnetic filter designs were tested to separate the ferrite from solution with an efficiency of 99% using the static fluid design.
High Pressure High Temperature (HPHT) viscometers can of course be used at the drilling fluid design stage to determine its rheological properties under downhole condition.
The whole construction is similar to an oil well on land, with the weight of the drilling fluid designed to contain the geological pressures deep in the ground.
Firstly, there are at least two kinds of particles (CIPs and abrasives) in the fluid, increasing the difficulty of fluid design and preparation.
In this work, we solve the integrated process and fluid design problem using the continuous-molecular targeting computer-aided molecular design (CoMT CAMD) framework.
However, the proper fuel deployment and fluid design for the micro-TPV reactor are strongly associated with combustion stability and radiant intensity of the micro-TPV reactor.
The resulting method for fluid design is based on a group-contribution method for the PC-SAFT parameters (GPC-SAFT) and applied to the design of working fluids for Organic Rankine cycles and solvents for CO2 capture.
The pore pressure profiles (green lines) against depth correspond to the static equivalent densities of 1.0 1.4 gr/cm3; therefore, the working fluid designed has density of 1.49 gr/cm3.
