Sentence examples for the flow orientation from inspiring English sources

Results for topside and deck mass effect on the stress distribution on the columns also suggested high stress distribution around the joint area of the inner columns for extreme and survival weather conditions, irrespective of the flow orientation.

We have already reported that the original J-band of the as-deposited MS-C20 binary LB systems (located at 590 to 594 nm) has a significant optical anisotropy due to the flow orientation effect during the transfer process [27], but the reorganized J-band located at 597 to 599 nm after HTT is isotropic, as shown in Figure 4.

Minari and coworkers estimated that the length of the MS J-aggregate as several hundred nanometers and that the MS J-aggregates are separated from the regions of matrix molecules of C20 based on the analytical model for characterizing the flow orientation effect during the transfer process of the LB deposition [27].

In practice, when monitoring an in vivo flow in a biological sample, the flow orientation may vary from zero to 90 degree relative to the incident beam, which leads to a wide dynamic range of axial flow velocity.

However, the influences of the azimuthal angle and the external flow orientation are negligible.

However the deviation of the NW SE flow orientation from trench-normal direction may possibly be due to variation in the slab geometry which causes the slab detachment.

Comparisons of the conservation properties demonstrate that the new scheme is the only one of the five that conserves all four domain-summed quantities, and it is the only one that both prevents a spurious energy cascade to the smallest resolved scales and maintains the correct flow orientation with respect to an external forcing.

While the influence of flow orientation on convective heat transfer is not as strong as that of as flow resistance, O-I and O-II show almost the same performance, and O-III case can acquire a higher average Nusselt number value for its two outlets.

The experiments highlight the important effects of cylinder curvature versus flow orientation on the combined cross-flow/in-line VIV.

Detailed internal flow fields showed that the optimum model can relieve the impeller wake and improve both the pressure distribution and flow orientation.

To achieve these objectives, the position of an obstacle shielding the returning blade of the Savonius turbine and possibly leading to a better flow orientation toward the advancing blade is optimized.