Sentence examples for the first laminate from inspiring English sources

The first laminate was constituted by stacking ten layers of bidirectional flax fabrics.

The first laminate, named Flax, was constituted by stacking ten layers of bidirectional flax fabrics.

In Table 1, we can observe the mid-plane maximum deflections obtained for the first laminate submitted to the uniform pressure, and the values provided by (Ferreira and Roque 2009) which used a third-order shear deformation theory (TSDT).

First, laminated composite plates containing unidirectional fine SMA wires are fabricated.

At the first stage, the laminate is subdivided into two antisymmetric parts and the upper one is analyzed by including an unknown twisting moment.

Shorten the first piece of laminate flooring so the joints in this row will be offset (staggered) in relationship to the first row.

In the stress model, the governing equations of displacements within the adherends are formulated using the first-order laminated plate theory.

A consolidated laminate was then made from the prepreg, and for comparison, a second laminate was produced from a conventional woven prepreg of 3k CF/PPS (60/40 wt%).

First, the laminate uses a composite materials approach whereby portions of the surface are more adhesive (not conductive) and other portions are conductive (less adhesive), which allows us to tailor the adhesive strength and interconnect resistance over a wider range then otherwise possible.

In the case of the DBM laminate, the first sign of damage was that delamination almost occurred and was observed near stitches and resin-rich regions.

This two step approach permits the separation of the structural analysis (strength, buckling, etc)., which is performed at the first step, from the laminate stacking sequence combinatorial problem, which is dealt efficiently with genetic algorithms at the second step.