Sentence examples for the feed direction from inspiring English sources

The path length depends on the feed direction and the surface topology.

The feed direction residual stress was almost a factor of two larger than the rolling direction residual stress.

In each zone, the variation of the steepest slope direction is lower, total path length is minimized and the feed direction is near the optimal feed direction.

The displacement fluctuation along the feed direction contributes to the bright and dark stripes on the surface of workpiece in a precise cylindrical turning.

A recent and promising method for reducing burr size in metal cutting is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are added in the feed direction during cutting.

To generate continuous feed motion along sharp cornered tool-paths, most NC systems smooth corners locally using a pre-specified curve or a spline and slow down to be able to change the feed direction within machine kinematic limits.

The results showed that All values of surface roughness had a "vacuum belt" when λ = 0° and λ = 45°, but it did not appear when λ = 90° (λ refers to the angle between the feeding direction and the wood grain).

The simulated and tested results matched well and the return losses of the cylindrical conformal 3DIMAs with radii of curvatures of 60, 45 and 25 mm were less than −10 dB while resonant frequencies and their gain values were significantly influenced by the radius of curvature and the feeding direction.

The feeding direction can be controlled to create different feature shapes.

On the contrary, when the stage moves opposite to the feeding direction, an appropriate feed value can be easily achieved.

In addition, some removed materials are all accumulated at the edge of the scanned area in the feeding direction for the three scratching angles.