Sentence examples for the eccentricity between from inspiring English sources

The dynamic relaxation algorithm is used with a model that takes into account the eccentricity between the elements.

Upper yield strength is extremely sensitive to the eccentricity between the force application axis and the axis of symmetry of the test piece.

The eccentricity between resultant wind force and center of stiffness (and also the torque) is larger when the wind is nearly parallel to the long axis, than when it is nearly parallel to the short axis.

Large gaps between two simply supported girders during earthquakes will increase the train derailment coefficient, and thus a reduction in the eccentricity between two girders can enhance the safety of moving trains.

The width of the annular space between the casing and the formation d g is the sum of the thickness of the liquid layer outside the casing d 3 and the thickness of the cement sheath d 4. Because of the eccentricity between the casing and formation, the width of the specific annular space d g varies between 26 and 30 mm.

The simulation platform was eventually used to assess the energy benefits of the sliding vane pump over a centrifugal machine along the Worldwide harmonized Light vehicles Test Cycle (WLTC) with respect to a fixed geometrical configuration and an optimized one achieved through a control on the eccentricity between stator and rotor that tuned up the flow rate on the cooling demand.

As far as possible, the fabricating eccentricity between the end sectional center of web members and the axis of chord should be small to avoid the considerable torsional deformation in the chord.

In the process of sculpture surfaces machining, due to the changes of the cutter orientation and the inevitable eccentricity between tool and spindle, machining parameters optimization based on five-axis cutting force is quite a challenge.

Sixty out of the 114 cells examined in this study were recorded in the operculum (eccentricity <3 deg) and 54 in the calcarine (eccentricity between 6 and 16 deg, most around 7 8 deg).

This paper presents some insight into the behaviour of grouted sliplined pipes with the results of a numerical (finite element) analysis on the effects of eccentricity between the liner and host pipe and bonding at the pipe interfaces.

This study shows that the direction of eccentricity between the liner and host pipe in a grouted sliplined pipe has a significant impact on the behaviour of the pipe with unbonded interfaces (a pipe-within-a-pipe system), or with bonded interfaces (a composite pipe).