Sentence examples for the development of shrinkage from inspiring English sources
Long-term deformations were monitored for a period of 239 days while the samples were subjected to their own sustained self-weight and to the development of shrinkage.
The model predictions on the development of shrinkage strain are compared with experimental results and a good agreement between them is found.
Lower shrinkage/expansion strains would reduce the development of shrinkage microcracks and yields LMM with better tensile and compressive strength as discussed in some cases in the previous section.
Because of this, only brief considerations are provided on this solution while still presenting recent research dealing with the development of shrinkage gradients through the slab thickness when cast on steel decks.
The effect of processing conditions on the development of shrinkage in LGP moldings of both PCs was ranked from most to least: the packing pressure, melt temperature, mold temperature, injection speed and packing time.
However, these methods are routinely used in flat dentin surfaces in which C-factor is low, and the development of shrinkage stress is not directed toward the bonding interface [5], different from what it occurs in posterior tooth restoration in the oral environment.
At high W/B, steel slag tends to accelerate the development of drying shrinkage at the early ages, but it has an insignificant influence on the ultimate shrinkage at 90 days.
The ultimate autogenous shrinkage was insignificantly affected by the curing conditions, but the heat curing accelerated the development of autogenous shrinkage.
However, the absolute value of autogenous shrinkage strain still cannot be obtained from the proposed model, because the model gives only the development of autogenous shrinkage.
High evaporation rate promotes the development of plastic shrinkage and cracking of fresh concrete.
For this purpose, separate concrete specimens were prepared and used to monitor the development of this shrinkage gradient.
