Sentence examples for the developed strength from inspiring English sources

The results of analysis of variance (ANOVA) indicated that the accuracy of the developed strength models based on response surface method was satisfactory.

It is concluded that the curing conditions and the time of hydrotalcite-like phases formation and their quantity are crucial to the developed strength and shrinkage reduction properties of MAAS, which are highly dependent on the reactivity and content of reactive MgO.

And that developed strength can be focused into a power that does not know defeat.

The test results showed that the magnitudes of τ max and τ f were influenced by the developed concrete strength, as indicated by the different values of t e.

First, the validity of the developed muscle strength component score was assessed in the subsample by concurrent and construct validity.

This test involves assessment of the developed muscle strength and physical fitness of the entire motor organ [ 9].

The compressive strength of all samples ranges from 15.05 to 30.25 MPa, the geopolymer synthesized from mechanical grinding preactivation displayed better developed strength.

Comparisons between predictions and experimental results on the developed compressive strengths indicated that significant overestimations were made by the model in early-stage curing before t eq of 18 h (Fig. 4a).

At 168 h, the developed flexural strengths at curing temperatures of 20 and − 10 °C were 21.8 and 19.4 MPa for 0 wt% MMA, 20.9 and 18.4 MPa for 2.5 wt% MMA, 19.6 and 18.2 MPa for 5 wt% MMA, respectively.

Similar to the reference documents, when relaxation effects are taken into consideration, a point of zero stress can be identified, and the moment in time of cracking is shown by the first intersection of the two graphed properties (developed strength and developed stresses).

However, due to the contribution of the PWP to the CPB strength (see Fig. 9a), there is still a small difference in the CPB strength among the CPB samples at the same room temperature even after two-days of curing, (3) it can be found that in Fig. 8b, the changes to the CPB strength can be well captured by the developed model on strength (the coefficient of determination is 0.97).