Sentence examples for the current subframe from inspiring English sources

For example, if a user was allocated multiple RBs over the past few subframes, then its priority at the current subframe may be reduced (even though ACKs/NACKs are still pending).

Log and Exp rules used in simulations are similar to the ones introduced in Section 2.1 (see (3)), however, instead of scheduling, one user in every scheduling instant, we can now schedule one user in every RB in the current subframe.

The UE transmission power for the current subframe is determined by Eq. 7 while satisfying 10 log left({M}_{mathrm{PHR}}right)+{mathrm{PSD}}_{tx}+{varDelta}_{mathrm{TF}}(i +f(i le {P}_{max }, (14 where M PHR is the number of PRBs that the UE power capability can afford.

Let the residual and original signal in the previous and current subframe be,,,, respectively.

If the prediction lags between previous and current subframe are same, and the filter order is one, previous residual and current residual are expressed as (7).

Thus, the throughput provided by A i may be lower than W i because the flow scheduler does not allocate sufficient slots in the current downlink subframe.

To speed up the tracking of the noise spectral minimum, an increase in the importance of the current sub-frame, with respect to the other past subframes is proposed (17).

Then in each subsequent subframe, the scheduler combines this solution with the current CQI and average rate to compute a schedule, as described in Section 4.4.

The processing time required between an UL grant and the corresponding UL transmission is 4 subframes (i.e., 4 ms) in the current standard [16].

QDRA dynamically adjust the DL/UL subframe ratio in phase 1 in order to adapt to the current situation, whereas the priority scheme maintains its fixed ratio of DL and UL.

The current channel attenuation on each subcarrier and for each mobile is estimated by the access node based on the SNR of the signal sent by each mobile during the uplink contention subframe.