The empirical standard errors are in good agreement with the corresponding estimated standard errors, except for the IPW estimator when n≤100 and π≤0.6.
The -coordinate denotes the index of individuals and the -coordinate denotes the corresponding estimated mean.
Note that the corresponding estimated red trajectories accurately follow the multiple targets present in the field.
A comparison of these results has also been made with the corresponding estimated figures for the performance of the system when originally designed.
In addition, p ̂ k i and p k i denote the corresponding estimated and exact positions of mobile node at i th run and k th position.
Optimal channel combinations of C3-C4 and the corresponding estimated time-frequency ROI for different criteria and different subjects are listed in Table 5.
We present the performance of the three chosen RA BCH codes and the corresponding estimated performance based on the presented model.
Table 2 gives the results under Model 3 and Model 4. The bias remains small for β ̂ I 1 and β ̂ A 2. The empirical standard errors are also close to the corresponding estimated standard errors.
The average spectra for the investigated CNTs recorded using the same AFM probe are shown within Figure 3b, while the corresponding estimated resistance values are included in Table 1.
In so doing, the determined optimal anodizing conditions were: Cox = 13.6 g L−1, T = 21.4 °C, j = 2.48A dm−2, Csul = 186.3 g L−1, while the corresponding estimated response values were 57.6 μm, 775 N and 4.16 mm for thickness, maximum load and deflection at failure, respectively.
The determined optimal anodizing conditions were: duty cycle = 65%, frequency = 326 Hz, imax = 3.5 and imin = 0.5 A/dm2, while the corresponding estimated responses values were 170 μm, 526 Hv0.1 and 2.12 × 10− 7 g/N.m for thickness, microhardness, and wear rate, respectively.
