Sentence examples for the constant deflection from inspiring English sources

The constant deflection compression set was measured according to ASTM D 3574 (test D).

In contrast with assuming the constant deflection during debonding, the above mentioned results indicate that the deflection and curvature of the beam increases by 7 15%%, during debonding failure.

Topographic images were taken in the constant-deflection mode using oxide-sharpened microfabricated Si3N4 cantilevers (Park Scientific Instruments, Mountain View, CA) with typical curvature radii of 20 nm and spring constant of 0.01 N/m.

A simplified approach in which the method of constant deflection contour lines [1] is used is presented in this paper to analyze the large amplitude free vibrations of thin elastic plates.

The methodology entails the application of a constant deflection to a μm-sized free-standing aluminum-alloy cantilever beam for a prolonged period of time.

The joint was subjected to four point bending, in tension/compression loading, under constant deflection rate, with the bondline being parallel to the applied load.

In the contact mode, an electronic feedback circuit maintains a constant deflection, ensuring a constant force of interaction between the cantilever tip and sample.

The z (vertical) position of the sample (or tip) is monitored by an electronic feedback circuit that maintains a constant deflection, ensuring a constant force of interaction between the cantilever tip and sample.

The cycle bending fatigue behavior of Grade 91 was studied under constant deflection.

Physical characterization was performed by FTIR, XRD, SEM and micro-CT, where as mechanical features were evaluated by static compression and constant deflection compression tests.

A constant deflection device designed for use within a transmission electron microscope (TEM) was used to investigate the change in dislocation configuration ahead of a crack tip during stress corrosion cracking (SCC) of type 310 austenitic stainless steel in a boiling MgCl2 solution, and the initiation of stress corrosion microcracking.