The multiple weighing technique has advantages of increasing the collection time by collecting large water mass thereby reducing the diverter error, the main source of measurement uncertainty, consequently improving measurement uncertainty of the system.
Following the determination of PI and GI, 4 ml paraffin-stimulated saliva was collected and the collection time was recorded.
To minimize the collection time, the patterns were collected only in the 33° to 43° 2θ range back and forth at a scan rate of 5°/min and the evolution of the diffraction peaks was monitored simultaneously.
After collecting each sample, women recorded the collection time on the tube and in a diary.
In striatal experiments, samples are collected in 5 min intervals, but the collection time is increased to 10 min for mPFC samples to account for the decreased flow rate.
Several free software solutions, such as WebExp (Keller, Gunasekharan, Mayo, & Corley, 2009) and MiniJudge (Myers, 2009), have been developed to allow acceptability judgments to be collected over the Web, and thus reduce some of the collection time.
The sensitivity can be further improved by increasing the collection time.
Saliva flow rate was calculated by dividing the obtained saliva volume by the collection time.
Depending on the collection time, the thickness of CNT films can be changed from micrometers to a few centimeters [35].
The penetration of nanoparticles through the electrospun filter media could be reduced by increasing the filter thickness, which is controlled by the collection time during the electrospinning process.
We demonstrate the fabrication of porous double-layer melt-blown PBT nano-/micro-fiber composites by tuning the collection time of the melt-blown SP/PBT blend fibers.
