Sentence examples for the circulating velocity from inspiring English sources

The circulating velocity in the tube in V-L-S flow boiling was found to increase with the increase of the overall driving force of heat transfer or temperature difference between the steam and the boiling fluid, and it is higher than that of the V-L flow boiling.

The liquid circulating velocity UL was measured by observing the time required for a tracer particle to travel a fixed distance (3.5 cm) in the downcomer through analysis of the images taken by a video camera.

The influence of baffle clearance design on the liquid circulating velocity, gas holdup and pressure drop in a two riser rectangular airlift reactor with inverse internal loop and expanded gas liquid separator was investigated using water and mineralized CMC solutions covering a range of effective viscosity from 0.02 to 0.5 Pa s and surface tension from 0.065 to 0.085 N/m.

Specific gas-liquid interfacial areas and gas hold-ups in the riser and downcomer sections as well as the liquid circulating velocity were studied using highly viscous pseudo-plastic solutions of carboxymethyl cellulose (CMC).

There is no obvious effect of circulating velocity but there is a clear distinction in the pressure drops when varying the solid holdups.

It was shown that even such a mini-scale external loop bubble column could be characterized in terms of gas holdup, liquid circulating velocity and mass transfer properties according to our previous correlations proposed for the bench to pilot scale column.

In the end the controlling effect of the retrofitting system and the applicability of the optimal parameters analytical expressions are proven for a wide range of circulating velocities.

A particular retrofit is proposed for each structure in order to accomplish the Serviceability Limit State of vertical acceleration, and the controlling effect of the proposed system is shown for a wide range of trains and circulating velocities.

These expressions are then applied to real bridges subjected to railway traffic, and their adequacy is proven for a wide range of circulating velocities.

The superficial velocity of the circulating liquid in the riser (uLR) was also measured.

Advancing the spouting velocity or the circulating ratio, the solid concentration in the riser increases and the amplitude of the pressure fluctuations rises.