Sentence examples for the blend with from inspiring English sources

Furthermore, the heat resistance of the blend with a highly crystalline matrix is much better than that of the blend with an amorphous one as expected.

The blend with EPDM had a better compatibilization than PE-g-MAH.

The blend with shorter τ was crosslinked by electron-beam irradiation at the lower dose level.

As for the blend with 70 wt.% HDPE, however, one could not observe epitaxy.

The bulk-fracture toughness was shown to be higher for the blend with smaller PSU particles.

After annealing, the obvious interfacial crystallization was still obtained in the blend with high crosslink degree.

Therefore, it is suggested the blend with other oils or the selective extraction of the ω-3 fatty acids from S. obliquus oil.

Experimentally observed results showed that, for the blend with a smaller viscosity ratio, major morphological changes occurred during the initial softening stage of blending.

For the blend with a larger viscosity ratio, the extended striations are transformed to a droplet morphology gradually along the screw.

The efficiency of the improvement in toughness for the blend with PMMA as the matrix polymer, as a result of the addition of the modifier, was lower than that of the blend with PVC.

The impact strength of PLA improved from 4.6 to 38.4 kJ/m2 for the blend with 40wt% PBSA and 0.6wt% chain extender.