Sentence examples for the beams increases from inspiring English sources
Focusing the beams increases their signal strength, and using large numbers of them greatly increases the antenna's traffic capacity.
When the out-of-plane displacement of one of the beams increases, the incoupling into the plasmonic resonance is reduced, reducing the heating and allowing the beam to cool off, with a certain time delay controlled by the heat capacity, restoring the equilibrium position.
The ultimate strengths of the beams increased with age and reinforcement volume fractions.
With increasing prestress levels, the cracking, yield, and ultimate loads of the beams increased.
For some imaging setups increased filter thicknesses, while strongly absorbing the beams, increased the SNR of material decomposed images.
The yield and ultimate load carrying capacities of the beams increased by a factor of 2 and 2.38 times, respectively.
The response of the damaged frames is evaluated when retrofitted using three approaches, namely, increasing the strength of the beams, increasing the stiffness of the beams, and increasing both strength and stiffness of the beams.
From the load tests, it was observed that the shear capacities of the beams increased significantly due to the addition of steel fibers in concrete.
Furthermore, inclined laminates were more effective than vertical laminates and the shear capacity of the beams increased with the percentage of laminates.
It is shown that, upper limit load of the beam increases as the temperature gradient increases.
Adding longitudinal reinforcement to the mid-height sections of the beam increases the catenary action of the substructure considerably without a change in model behavior at other stages.
