Sentence examples for the average breakdown from inspiring English sources

And the average breakdown electric field reaches as high as 212.5 V/μm.

The average breakdown electric field would reach as high as 201.5 V/μm.

Inset shows the average breakdown fields (BK-1 and BK-2) for the investigated samples.

The average breakdown voltage (VBD) of the randomly measured ten devices of the Al/Al2O3/TiN structures is -4.99 V (i.e., -4.6 to -5.2 V) whereas this value of the Al/Cu/Al2O3/TiN structures is 3.99 V (i.e., -3.7 to -4.3 V), as shown in Figure 7a.

The number of children on average breakdown in our service pediatric intensive care is on the increase (40%% in 2014) against (20 % in 2005) with a occupancy rate has increased from 71%% in 2011 to 94 % in 2014.

The breakdown characteristic is linear if the breakdown voltage of two mixed gases with the same concentrations is equal to the average of breakdown voltage of each, i.e., V ¯ Ar 1 2 N 2 1 2 = V Ar + V N 2 2 Open image in new window.

The spark repetition rate was about 30 Hz, at an average breakdown voltage of 6.6 kV.

Compared with the typical GaN vertical heterostructure FETs without PBL, both of breakdown voltage and average breakdown electric field of device are increased more than 50%.

If one can compare between the breakdown voltage and the formation voltage of the Al/Cu/Al2O3/TiN structures with a 2-nm-thick Al2O3 layer, then the average value of breakdown voltage is higher than the formation voltage (-3.2 vs. 1.85 V).

The average values of breakdown potential (Ebp) and pitting resistance (Rpit) were enhanced to 0.12 V and 2.21E5 Ω cm2 (− 0.12 V and 1770 Ω cm2 for the substrate).

In addition, for all 112 days at the San Diego test site the average difference between the breakdown point and the maximum capacity is 5%%.