Sentence examples for the absorption with a from inspiring English sources

Cell density of the resulting stock solution was determined by measuring the absorbance at 600 nm with a spectrophotometer and comparing the absorption with a pre-determined reference curve.

The concentrations of each dye in the sample solution were calculated based on maximum extinction coefficient values of NMP4 and NMP5, which are 96,000 L/mol/cm at 735 nm and 99,000 L/mol/cm at 762 nm, respectively, by measuring the absorption with a UV vis system (8453 Value UV vis system; Agilent Technologies, Santa Clara, CA) using 1-cm width of cuvettes.

This interpretation is also supported by the reported changes in the anisotropy of the absorption with ( {a}_{{mathrm{H}}_2mathrm{O}} ).

It is demonstrated that the variation of the strut radius has a greater influence on the vibration absorption with a harmonic load in comparison to absorption with a shock load.

Dyeing of saline solution in the centrifuge tube was assessed by measurement of the photometric absorption with a spectrophotometer at a wavelength of 664 nm.

The ISB absorption with a peak at 3.7 μm in MQWs with the AlGaN interlayer, the high dislocation density, and the rough interface are the reasons of ISB absorption vanishing for MQW films with GaN/AlN SL interlayer.

The observable absorption with a gap under equilibrium condition fits well only with the first process for such type of materials[22].

Therefore, enhancing the NIR absorption with a longer wavelength has become a topic of great interest.

The ISB absorption with a peak at 3.7 μm was demonstrated in MQW films with AlGaN interlayer.

(c, d) The corresponding images taken from sample B. Figure4 shows the representative ISB absorption spectrum for samples A and B. Curve 1 corresponds to sample A; the ISB absorption with a peak at 3.7 μm is obviously visible.

13 After electropolymerization, 2 shows a redshift in the absorption band with a maximum at approximately 425 nm.