Sentence examples for testing of the coating from inspiring English sources

The startup chose a select number to pay for the development and testing of the coating for its products.

Testing of the coating specimens indicated that high frequency thermal cycling (1 h cycle time) could significantly degrade the coating performance.

The critical failure load determined by scratch tests of the coating with c-AlN segregation was highest among all the coatings studied in the present work, which indicated that the coating has the best adhesion.

Hardness test of the coating was measured with a Vickers hardness tester, using 200 g load.

The sliding wear test of the coating carried out against WC-Co ball revealed that the wear resistance of the coating improved upto seven times than the uncoated Ti-6Al-4V substrate.

Impedance tests of the coating showed that the coating is susceptible to electrolyte penetration, especially by acetic acid.

As the results from the FTIR testing of the roof coating strongly suggest that the coating is a cellulose nitrate product, further testing with Py-GC MS was not used as it was unlikely to contribute additional information to the identification Py-GC MS

Accelerated wear testing of the coated heat exchangers indicated that coating durability was a significant issue for the nanometre thick coatings investigated.

From the 0T-bending test, delamination of the coating layer was observed from heat-treated sample for 240 s which is composed of over 85% of the intermetallic compound phases.

Scratch testing of the PEEK coatings showed coating failure on the steel grit substrate to be cohesive, on the degreased substrate, adhesive and on the etched substrate a combination of both.

With the aim of testing the coating under more aggressive conditions, new samples were weathered at 10 ppm SO2 and 80% RH for longer time up to 4 weeks.