Sentence examples for test results analysis from inspiring English sources

This paper presents the background information, test results, analysis, and conclusions relating to the testing of two model bridge stringcourses subject to simulated parapet impact loading.

From the test results analysis and comparison, it was found that using 4% cement with 1% straw would show excellent results for construction in rain and flood prone areas and appeared economical as well.

Load control – 182 spore-testing of steam sterilization was conducted and the number of positive test results was 0. Based on the test results analysis we came to a conclusion that implementing central sterilization in primary level institutions, with the use of autoclaves, is necessary to enable more efficient and effective sterilization process.

The test result analysis discussion includes cracking pattern, load displacement, deflected shapes, strain distribution in CFRP, and deformability index.

Based on the test result analysis, the ductility ratio of the specimen with one-side sheathing was greater than that of the specimen with two-side sheathing.

Through the test result analysis, the two ANN models showed their prediction accuracy with an acceptable error rate when applied in the control algorithm.

On the base of DSR, BBR and CA test result analysis, the relationship of Eη with G∗sin δ, tan δ, m-value and Ic was discussed respectively.

Meanwhile, the influence of the coil cross-section area on the test result analysis is eliminated, and the influence of the lift-off distance between coil and wire rope on the detection result is also reduced.

Detailed focus is brought to the effect of fabrication imperfections, type of welding and residual stresses on the behavior of the proposed long hollow columns in test result analysis and the finite element modeling.

This involves the dedicated system design & construction, fully planned experimental testing under various simulated climatic conditions representing the climate of hot & dry, warm & dry, moderate, warm & humid and standard lab testing condition, testing results analysis and discussion, as well as the parallel comparison against the commercial dew point air cooler.

"We have not been presented with any [third] party lab test results for analysis, so we are unable to comment on publicised reports of private lab tests".