Sentence examples for test pumps from inspiring English sources

This paper explores the use of a commercial CFD code to estimate the total radial load on the impeller of two test pumps.

"We put a test pump down into the well and start pumping," she said, adding that, ideally, a well should produce at least five gallons of water per minute for four hours.

The main design parameters of the test pump are given in Table 1.

Further efforts to constrain the hydrogeological parameters of the various geological units, including riverbed deposits, which could include targeted test pumping, could improve understanding of the system.

As mentioned by Liu [9], the white noise phenomenon may cause the complex turbulence flow inside the suction region of the test pump.

If these positive phenomena are represented by the torque efficiency of the test pump, an improvement of more than 1.3% can be achieved at a discharge pressure of 300 bars and a rotational speed of 100 rpm.

By using a test pump with similar characteristics, the company was able to verify that all the design criteria used for the real project pumps was able to fully guarantee proper behaviour.

When you get into the test, pump yourself up.

A procedure should be followed to identify the steps to be taken, readings to be recorded, and safety precautions to be observed while testing pumps.

The tested pump is driven by an electric AC-motor.

The objective of all pump head versus flow tests is to verify that the tested pump produces the required head at a given flow rate and pump speed.