Sentence examples for test of the specimens from inspiring English sources

Fracture stresses of materials in the initial state (σf0) and after the corresponding treatments (σf) were determined by the three-point bend test of the specimens in air at 20 °C.

Ultimate fracture stresses of materials in the initial state (σ f0) and after the corresponding treatment (σ f) were determined during the three-point bending test of the specimens in air at 20 °C.

Fracture testing of the specimens is performed using the tapered double-cantilever beam (TDCB) test method.

A specific load fixture has been developed and used for the testing of the specimens in the mixed mode.

The model is validated using a comparison of fatigue tests of the specimens.

The testing of the specimens was carried out on a displacement controlled Instron make Universal Testing Machine of 2500 kN capacity.

Stress strain plots of compressive load testing of the specimens exposed to different temperatures are shown in Figs. 9 and 10.

Tensile tests of the specimens were performed at room temperature and at constant speed of 0.2 mm/min under static load and superimposed ultrasonic excitations.

Tensile testing of the specimens from each category is carried out and finite element method (FEM) models are used to simulate the mechanical behavior of the specimens during the test.

Tensile tests of the specimens were carried out to obtain mechanical properties of MWCNT/epoxy composites for various weight-percents (wt.%) of MWCNTs.

When considering the use of molecular tools, the investigator must trade off the impact of specimen collection against the added value of the measurements that can be obtained from testing of the specimens.