Sentence examples for test corresponding to from inspiring English sources

This stabilization is occurred after the first cycle of the 4-point bending test corresponding to the higher stress concentration (Kt-4p = 1.66), while it requires many cycles under the 3-point bending test corresponding to the lower stress concentration (Kt-3p = 1.54).

The research included performing the tests, in literature referred to as the short-term creep tests, at the constant level of stress of the test corresponding to the operating one and, at the temperature higher than the preset design one, as well as the creep tests with and without the measurement of elongation during the test.

The detailed results of the partial Mantel test corresponding to different numbers of top genes is shown in Fig. 6.

The pixel values, or contrasts, in each contrast image were compared to the threshold value measured in the contrast sensitivity test corresponding to the appropriate frequency.

The GUI consisted of a series of three buttons for the ABX test (two buttons for the DCR test), each button triad (or dyad for the DCR test) corresponding to the same part of a music recording.

According to Zoback et al. ([2003]), we consider the clear LOP of each test (corresponding to a distinct break-in-slope of the linear pressure build-up) to be approximately equal to the Shmin magnitude.

The results of the simulations have been validated with experimental tests corresponding to real configurations.

Furthermore the test setup has been developed in order to facilitate standardized cyclic tests corresponding to those described by ECCS.

Then a series of tests corresponding to various wave headings are carried out to investigate the vibrational characteristics of the model.

In total, growth-coupled designs could be identified for 36 out of the total 54 conditions tested, corresponding to eight out of the 11 targets.

The types of loading conditions are simulated by conducting long-term triaxial creep tests with stepwise loading corresponding to the slow construction of the asphalt core and dam embankment; unloading-reloading cycles corresponding to seasonal reservoir fluctuations, and dynamic cyclic tests corresponding to earthquake loading.