Sentence examples for test and crack from inspiring English sources

The assembled microelectronic devices were subjected to a thermal cycling test, and crack initiation and propagation during the test were studied.

Welds and base metal were tested by methods described in International and Russian standards, namely the static tension test, Charpy V-notch impact test, drop weight test to determine nil-ductility transition (NDT) temperature, threepoint bending (Tkb) test, and crack tip opening displacement (CTOD) test.

Both test and crack-closure analyses have shown that the stress-intensity-factor-range-against-rate curves are affected by the stress ratio (R), the applied stress or load level (Smax or Pmax), and the crack-front constraint (plane-stress or plane-strain behavior).

Wheel tracking (rutting) test, Moisture susceptibility test, and cracking resistance were also conducted to examine the high and low-temperature performance of the hot mix asphalt (HMA) mixture.

Without really thinking, I grabbed a raspberry lemonade, biked over to the library, set up for the test and cracked open the lemonade.

Crack initiation and propagation were monitored by visual inspection during testing, and crack patterns were marked.

In this work, neutron diffraction tests and crack compliance tests showed no correlation between the interface pressure and increased holding torque.

This paper describes an arrayed multi-coil probe, newly developed for the testing and crack sizing of steam generator tubes by eddy current testing (ECT).

Specific damage mechanisms were internal carbide and carbide matrix interface cracks in IP tests and crack propagation along {1 1}-microtwinin planes in OP tests.

Fatigue crack growth tests and crack closure measurements were performed for A356 cast aluminium alloys reinforced by 10 or 20% SiC particles and their matrix A356 alloys with systematically controlled dendrite cell size and particle distribution.

Mechanical stability is tested and crack generation of the modified material is determined by a four-point bending test connected with a corrosion current measurement using physiological saline solution as the electrolyte.