Sentence examples for terminal screws from inspiring English sources

Strip about one-half inch of insulation from the ends of wire and attach them to the terminal screws, then reassemble the socket.

In the current series we used a short construct design in order to reduce the stress on the terminal screws.

Long constructs have increased lever arm and stiffness; thus, they increase the stress on the terminal screws and may result in junctional kyphosis [ 23].

Precontoured rods often required the placement of terminal screws with a higher offset, resulting in implant prominence, especially in the thoracolumbar junction [ 27].

The addition of an intermediate screw at the index level converts the construct from a bridging implant (with only terminal screws) to a three-point bending construct.

Instrumentation of the osteoporotic spine can be managed by long instrumentation constructs, but these increase operative time and hemorrhage and elongate the lever arm on the construct terminal end causing increased pullout forces on the terminal screws.

In all patients receiving a large MMPRP, the terminal screw hole of the ramus was unused accordingly all inserted large MMPRPs were trimmed by at least the terminal screw hole.

82.98% of the small and 91.80% of the medium MMPRPs were trimmed by at least the terminal screw hole of the ramus part.

Connect a wire from a terminal screw on both buttons.

Securely tighten the ground terminal screw to the ground wire.

If no power present, determine which wire is connects a heating element terminal screw to the bottom thermostat terminal screw.