Sentence examples for temperature the specimens from inspiring English sources

After the cooling process at room temperature, the specimens was polishing with 800 and 1200-grit diamond papers.

Under the same stress and temperature, the specimens with multiholes using the LD process have the longest creep lives compared with the other two processes.

Prior to tensile testing at room temperature, the specimens were heat treated to obtain grain sizes ranging from 3 to 60 μm.

However, a ductile-to-brittle transition was observed with ligament length for marginally tough blends which contained a low content of EPR-g-MA in the rubber phase and had a ductile brittle temperature near or above room temperature; the specimens with short ligament length fractured in a ductile manner, while the specimens with long ligaments showed brittle fracture.

After washing with lacZ at room temperature the specimens were stained for 14 18 hrs at 37°C with fresh galactosidase staining solution.

After 40-minute exposure to air at room temperature, the specimens were immerged into the physiological saline solution.

At low temperature the specimen eventually cracks along the slip bands by shear, but at high temperature the specimen cracks by normal and shows mode I cracking.

Afterwards, in an ambient pressure of 5.6 × 10−4 mbar at room temperature, the specimen was etched by Ar IBE (MIBE-150C).

In order to ensure a uniform temperature throughout the specimens, the temperature was held constant at the maximum value for 1 h before cooling.

However, α-crystal could be obtained at low crystallization temperature for the specimens melted at high temperature.

The increase in temperature due to the release of the latent heat when the tissue froze at the supercooling point was around 1°C for both species, and the temperature of the specimens took on average ca. 2 minutes to match again the ambient temperature.