Sentence examples for temperature successfully from inspiring English sources

A delayed supply of the auxiliary feedwater after an excursion of the heater surface temperature successfully cooled the primary system until the end of the transient, where inflow of the coolant from the pressurizer contributed to a recovery of the coolant inventory in the core.

A heat-down curve (HDC) at a fixed temperature was successfully detected in the preliminary experiments.

In this study, it was demonstrated that using a thin AlGaAs layer grown at low temperature could successfully prevent the In composition from losing.

Consequently, the reaction temperature was successfully controlled between 55 and 65 °C by varying the H2O2 addition rate and the fluid temperature in the reactor's jacket.

The fluctuation of the flue gas temperature is successfully suppressed with a thermal storage tank installed in the heat transfer loop.

By using wavelet packet transforms, AE features at the grinding burn temperature can successfully be extracted without other mechanical interferential factors.

The critical metrics for the holographic monitoring of RC structures, including electrochemical noise, humidity and temperature, were successfully acquired and analysed using a post-processing program.

This temperature was successfully used in the previous research in analyzing the results of thermal degradation of alizarin and Phellodendron bark using gas chromatography mass spectrometry (Ahn, 2011; Ahn & Obendorf, 2004).

Response surface methodology (RSM) involving a central composite design (CCD) in four factors such as pH, adsorbent dosage, time contact and temperature was successfully employed for the investigation and optimization of dyes removal process.

Finally, a new class of nonvolatile and nonflammable fluids, called ionic liquids (e.g., molten salts at room temperature), were successfully proposed in place of hazardous and toxic organic solvents for lithium battery electrolytes.

The observed depression in equilibrium melting temperature was successfully analysed following the treatment proposed by Nishi and Wang and based on Scott's expression for chemical potentials in a binary polymer mixture to yield a negative interaction parameter (ξ=−0.13±0.05).