Red lead is produced by heating litharge at a carefully controlled temperature, lower than that used for the manufacture of litharge.
At higher mixing temperature, lower percent adhesion failure was observed, while at lower mixing temperature, lower DTS was obtained.
No pitting was observed at temperature lower than 0°C.
For temperature lower than 50 K, the linewidth is almost constant at about 35 meV.
On the contrary, office workers would set the temperature lower when they first entered the office.
Presence of 87.8% rutile phase in Ti700 indicates that phase conversion has started at a temperature lower than 700°C.
The relationships among syngas composition, reaction temperature, lower heating value of syngas and O2 content are shown in Fig. 3.
In solvent-assisted bonding, on the other hand, a temperature lower than Tg of PMMA (85 95 °C) is used.
The diffusion of Ge atoms in Si at the temperature lower than 650°C can be neglected.
Faster wind speed, higher air temperature, lower relative humidity and longer delay in compaction commonly result in a poor strength.
The temperature lower than 0 °C in Hunchun kept the feces of wild sika deer fresh as much as possible.
